I've got the ball rolling on this and have attached the first wip pages of the schematics in the first post.
If you spot any errors or have any tips feel free to post and let me know.
Couple of questions and points:
At the right of the schematic you will notice a 16R4 chip, is this a Programmable Array Logic Chip or something altogether different?
[Edit] Answer - Yes its a PAL (Datasheet?)[EDIT 21/09/12] The other question I forgot to ask is how many PCB layers does the A1200 board have?
[Edit 22/10/12] Answer - Cut a board in half and inspect the traces. 
On the MC68881 chip I have forgotten to add the VCC label to _Size (pin 18).
You will notice some gate component graphics are not displayed properly. this is either due to Kicad not properly defining the curved lines as ellipses when plotting to svg. When opened in Inkscape it just draws them as polylines. Either that or it's Inkscape's implementation of svg that's causing some problem.
[Edit 22/10/12] Answer - Kicad problem it just draws them as polylines, confirmed.
I'll need to figure out what I'm going to do as a result of the svg problem. I wouldn't need svg if Kicad allowed the schematic to be scaled. I might ditch Kicad and try out Designspark, we'll see.
[Edit 22/10/12] Sticking to Kicad for it's open file format. I'll need access to this for documentation purposes.
[Edits 22/10/12 by MadAngus] Answering my own questions, PAL question answered by Bryce on AmiBay, Cheers.
